ANVILS & FIXTURES
Anvils and Fixtures that fit almost any Rockwell hardness tester or Brinell system from most manufacturers like:
Wilson(R) Instron(R), Buehler, Clark, Mitutoyo(R),
United, etc
|
SELECT ANVIL TYPE:
3/4" Shank Anvils
Wilson Instron,Buehler,
Clark, Mitutoyo®, United
25mm Shank Anvils
FOR: Newage RockwellHardness testers and some Brinell
20mm Shank Anvils
FOR: Some Newage Brinell testers
Jominy Fixtures
FOR: All manufactures' testers
Looking for Hardness Indenters
& test blocks?
Download a complete catalog for hardness accessories: test blocks,
anvils, indenters, etc.
Hardness Accesssories Catalog
Also See Custom Anvils and fixtures.
|
Newage has a wide variety of anvils for use with hardness testers from most manufacturers with anvil posts (or shanks) in 3/4", 25mm , and 20mm diameter as well as Jominy units for any size shank.
If you have a need for something special, Newage routinely makes custom anvils and fixtures for samples. These pieces range from simple custom anvils to a large automated fixtures such as a camshaft fixture that adjusts for a variety of sizes and type of camshafts. (Refer to custom applications under different models)
Looking for anvils for your Knooop or Vickers hardness testers? Please find them listed under the options for the individual microhardness tester models.
(through the link at the bottom of the product pages)
OTHER ACCESSORIES: Diamond or Ball Indenters or Hardness Test Blocks |
 |
Anvils with 3/4" shank to fit most Rockwell testers |
Model # |
Description |
NI-SP13A |
Flat Anvil, 2¾" diameter (NISP13A) |
NI-SP10 |
8" Anvil Table with locking ring (NISP10) |
NI-SP13B |
Spot and Vee Anvil combination (See photo) (NISP13B) |
NI-SP21 |
Diamond Spot Anvil (See photo for AT5309 below) (NISP21) |
NI-SP19 |
Adjustable Cylinder-Type Vee Anvil (See photo) (NISP19) |
NI-SP11 |
Short Workrest (Indentron® Only) (See Photo) (NISP11) |
NI-SP12 |
Extended Workrest (Indentron® Only) (See Photo) (NISP12) |
NI-SP17 |
Self-Aligning Cylinder Vee Anvil-use w/ NI-SP11 or NI-SP12 Workrest (NISP17) |
NI-SP18 |
External Jack Support (for 10" capacity machines) (NISP18) |
NI-SP25 |
2" Extended Spot Anvil (with locking ring) (NISP25) |
AT/5323 |
Anvil Adapter for standard 25mm shank anvil to fit most testers (AT5323) |
AT/5322 |
Anvil Adapter for 3/4" shank anvils to fit Versitron(R) & ME-2 (25mm) (AT5322) |
| |
 |
Anvil with 25mm shank to fit Versitron® & ME2 testers |
Model # |
Description |
AT-5310 |
Flat Anvil, 2" diameter (AT5310) |
AT-5311 |
Spot Anvil (AT5311) |
AT-/5311D |
2" Extended Spot Anvil (with locking ring) (AT5311D) |
9011 |
8" Anvil Table with locking ring (See photo for NI-SP10 above) (AT9011) |
AT-5312 |
Small Vee Anvil (AT5312) |
AT-5313 |
Large Vee Anvil (AT5313) |
AT-5324 |
Adjustable Cylinder Vee Anvil (See photo) (AT5324) |
AT-5309 |
Diamond Spot Anvil (AT5309) |
AT-5318 |
Anvil Reducer with 3 mini anvils: spot, vee, spot vee (AT5318) |
AT-5319 |
Flattened Ball Anvil for testing tapers (Versitron Only) (AT5319) |
AT-5319V |
Flattened Ball Anvil w/vee notch for tapered rounds (Versitron only) (AT5319V) |
AT-5322 |
Anvil Adaptor for 3/4" shank anvils to fit Versitron & ME-2 (25mm) (AT5322) |
AT-5323 |
Anvil Adapter for standard 25mm shank anvil to fit most testers (AT5323) |
AT-SP19
|
Adjustable Cylinder-Type Vee Anvil (See photo) (ATSP19) |
| Custom Fixtures - please call |
 |
Anvils with 20mm shank |
Model # |
Description |
HB/3007 |
Large flat anvil - 4¼" dia. (HB3007) |
HB/3008 |
Small flat anvil - 3" dia. (HB3008) |
HB/3009 |
Large Vee anvil - 3" dia. (HB3009) |
| |
| |
 |
Jominy Fixtures |
Model # |
Description |
9012 |
Standard Jominy Fixture, Any diameter shank |
|
|
