| Model # |
Description |
| MS-253W |
Statistical Package including Histogram and X-Bar/R charting |
| MS-270W |
Inch/Millimeter Scale for optically measuring case depth, or other features |
| MS-273 |
Save images of test impressions as bitmaps |
| MS-275 |
Save images of test impressions as bitmaps |
| MT-210 |
Save images of test impressions as bitmaps |
Automatic Measurement Upgrade Options for CAMS-Win
MAY ALSO BE RETROFITTED TO EXISTING CAMS SYSTEMS |
| MS-255 |
Automatic Measurement (Requires MS250W or MS 250WR plus adapter) |
| MS-260 |
Effective Case Depth Software for Manual Traverse System
(Requires MS250 or MS 250R plus adapter) Includes operator prompts for X/Y stage operation, automatic case curves, case depth calculation and many traverse sequence setups. |
Automatic Traverse Upgrade Options for use with CAMS-Win
MAY ALSO BE RETROFITTED TO EXISTING CAMS SYSTEMS |
| MS-251 |
Automatic X/Y Stage w/controlling software (Requires MS250W or MS 250WR plus adapter) |
| MS-252 |
Automatic Effective Case Depth Software (Requires MS250W or MS 250WR, plus adapter, plus MS 251) |
| MS-256 |
Automatic Cycle Start (For most testers that do not accept a RS232 start signal for example the Type M) |
Automatic Focus Upgrade Options for use with CAMS-Win
MAY ALSO BE RETROFITTED TO EXISTING CAMS SYSTEMS |
| MS-254 |
Autofocus with X/Y (Requires MS 251) |
| MS-254B |
Autofocus without X/Y |
| MC0320 |
Advanced imaging board |
| For use with computers that either have more than 15 megs of Ram OR have less than 15 megs but are not able to supply the following: unable to reserve the memory between 15 and 16 OR don't have a feature connector on the graphics card; OR don't have PCI slots. |
