|
Part # |
Description |
| Diamond
Indenters |
For
most standard Rockwell testers and Newage Indentron and ME-2.
(Link to see all types of indenters available) |
|
8110-07 |
C scale indenter with certificate to ASTM E18-07* |
| 8109-07 |
N scale diamond indenter
with certificateto ASTM E18-07* |
| 8103-07 |
C & A scale diamond indenter
with certificateto ASTM E18-07* |
| 8105-07 |
C, N, and A scale diamond
indenter with certificateto ASTM E18-07* |
| Special Diamond
Indenters for
Indentron only (OR see all custom indenters) |
| NI-SP3 |
Special short form indenter |
| NI-SP9 |
Special diamond indenter shape - call for information |
| NI-SP22A |
Special extended diamond
for clamp adapter -Use with NI-SP22 |
| *Comes marked with the
Newage name, part number, and serial number. The certificate lists
the scales and results from the indenter caibration |
| Ball
Indenters |
| 8111W |
1/16" carbide ball indentor with certificate to ASTM E18-07 |
| 8112W |
1/8" carbide ball indentor with certificate to ASTM E18-07 |
| 8113W |
1/4"
carbide ball indenter with certificate to ASTM E18-07 |
| 8114W |
1/2"
tungsten carbide ball indenter with certificate to ASTM E18-07 |
| NI-SP8 |
3/4"
steel ball indenter with certificate to ASTM E18-07 |
| NI-SP4 |
1/16" Short Form steel ball indentor w/ 10 extra balls |
| **N-Scale
Diamonds read the same for both international and domestic grade |
| Anvils |
| NI-SP10 |
8"
anvil table |
| NI-SP11 |
Short
Workrest |
| NI-SP12 |
Extended
Workrest |
| NI-SP13A |
Standard
70mm (2-3/4") flat anvil |
| NI-SP13B |
Standard
combination spot and vee anvil |
| NI-SP17 |
Self-Aligning
Cylinder type Vee anvil for use with NI-SP11 or NI-SP12 Workrests |
| NI-SP19 |
Adjustable
cylinder type Vee anvil |
| NI-SP21 |
Diamond
Spot Anvil |
| NI-SP25 |
2"
Extended Spot Anvil (includes locking ring) |
| Rockwell Hadness Test Blocks |
| Please use link to see our selection of Rockwell Test Blocks |
| Other
Accessories |
| NI-SP18 |
External
Jack Support (for 10" machines) |
| NI-SP20 |
Dust
Cover (specify model) |
| NI-SP22* |
Clamping
adapter for any model Indentron. Includes |
| NI130-B |
Floor
cabinet w/ locking door and drawer |
| NI-07 |
Adapter
to use Wilson "A" Style indenters on any model Indentron |
| AT130-PR |
Printer
w/cable. Dot Matrix, 80 Col., Plain Paper |
| DVX1B
|
Dataview
hardness data collection software |
| NI/5510 |
Gooseneck
Lamp |
| NI-08 |
Indenter
Gripsel |
| SC0046 |
Indenter
Holding Screw |
|
ATD98 |
Printer
cable, 25 pin, 6 ft |
| *
450 in./lb capacity - divide 450 by length of part in inches to
determine approx. weight that the part can be. |
| NI-10Z |
10Z
Scale for 300, 400 Series Superficial Testers - Includes 3/4"
ball indentor and 10Z test block. (Eliminates 45Kg load) |
| NI-D1000
|
Upgrade
old style to new style electronics |
| NI-ME
|
Motorized
Elevating Screw w/footswitch for 400 Series |
| UPGRADES
|
Upgrade
pneumatic drive to electric |
| AT130X3 |
Advanced
Software Upgrade Pack includes XBar/R, Date & Time, Round Correction,
Split Memory and Test Block Verification Programs. |
