| Model
# |
Description |
| ME-2-MT |
Motorized
Major Load - Electric For "DS" Models |
| ME-2-ME |
Motorized
Elevating Screw - For "DS" Models |
| 9010 |
Head Removal
Tool |
| AT/5510 |
Flex Arm
Test Point Illumination Light |
| AT/5620N |
Protective
Vinyl Cover for analog models |
| AT/5621 |
Protective
Vinyl Cover for digital models |
| AT130-PR |
Printer w/cable.
Dot Matrix, 80 Col., Plain Paper |
| NI-SP18 |
External
Jack Support (Requires 3/4" Post Anvils) |
| AT130B |
Metal Bench
Cabinet |
| ATD98 |
Printer cable,
25 pin, 6 ft |
| Optional Software - for all "DS" Models |
| *
AT130X3 |
Advanced
Software Upgrade Pack includes XBar/R, Date & Time, Round Correction,
Split Memory and Test Block Verification Programs. |
| *
AT130X2T |
Jominy Hardenability
Curve Program |
| *
ATCSTM1021 |
Brinell Software
Program for RDS Test System. Covers HB5, HB10 & HB30 Brinell
Scales. Requires 8115 and/or 8116 Indenters. |
| *
DV-X1B |
Dataview
Data collection software |
| *
NOTE: Newage Testin Instruments can provide a variety of other software
modifications, enhancements and upgrades. Please call our Technical
Sales Dept for further information. |
ROCKWELL HARDNESS TEST BLOCKS
|
| Complete list of available Rockwell test blocks
|
| HARDNESS INDENTERS (Complete list of indenters for all types of testers) |
| Diamond
Indenters For
most standard Rockwell testers and Newage ME-2 and Indentron |
|
8110-07 |
C scale indenter with certificate to ASTM E18-07* |
| 8109-07 |
N scale diamond indenter with certificate to ASTM E18-07* |
| 8103-07 |
C & A scale diamond indenter with certificate to ASTM E18-07* |
| 8105-07 |
C, N, and A scale diamond indenter with certificate to ASTM E18-07* |
| *Comes marked
with the Newage name, part number, and serial number. The certificate
lists the scales and results from the indenter caibration |
| Ball Indenters |
| 8111W-07 |
1/16" tungsten carbide ball indentor with certificate to ASTM E18-07 |
| 8112W-07 |
1/8" tungsten carbide ball indentor with certificate to ASTM E18-07 |
| 8113W-07 |
1/4" carbide ball indenter with certificate to ASTM E18-07 |
| 8114W-07 |
1/2" tungsten carbide ball indenter with certificate to ASTM E18-07 |
| AT5116W-07 |
1/16" tungsten carbide ball with certificate to ASTM E18-07 |
| AT5121W-07 |
1/4" tungsten carbide ball with certificate to ASTM E18-07 |
| 8114W-07 |
1/2" tungsten carbide ball indenter with certificate to ASTM E18-07 |
| 8115W |
2.5mm tungsten carbide ball indenter |
| 8116W |
5mm tungsten carbide ball indenter |
| ANVILS & MISC |
| AT/5310 |
Two Inch
Flat Anvil |
| AT/5311 |
Spot Anvil |
| AT/5312 |
Small Vee
Anvil |
| AT/5313 |
Large Vee
Anvil |
| AT/5322 |
Anvil Adapt.
for Wilson & other 3/4" dia. post anvils |
| 9011 |
8" Anvil
Table |
| 9012 |
Manual Jominy
Fixture (English or Metric) |
| ME/5309 |
Diamond Spot Anvil |
| ME-907 |
Indenter holding thumbscrew for most testers |
| 8118 |
1/16" ball indenter cap |
| 3/4" Post Anvils for External Jack Support |
| NI-SP13A |
Standard
Flat Anvil |
| NI-SP19
|
Adjustable
Cylinder Anvil |
